The B-DT 4CH.01 is a MOSFET dimmer which supports leading edge and trailing edge dimming. Four selectable dimming curves are available, and the module is able to control inductive, resistive, and capacitive loads. Immediate system changes are possible via on-board manual buttons.
Both leading and trailing edge modes are available. The leading edge supports both Inductive loads and resistive loads, while the trailing edge supports capacitive loads and resistive loads.
To prevent damage to the system and unit a variety of protective features are included. When the dimmer has been powered off, it is able to automatically restore the last scene used when powered on again.
AC power input: AC110/240V
Working power: DC12~30V
Power consumption: 25mA/DC24V
Output channel: 4CH/1.5A
Maximum output channel current in total: 6A
Dimming mode: Leading edge, trailing edge
Dimming curves: Linear, 1.5 exponent, 2.0 exponent, 3.0 exponent
Working temperature: -5°C~45°C
Working relative humidity: Up to 90%
Storage temperature: -20°C~+60°C
Storage relative humidity: Up to 93%
Dimensions: 216×90×66 (mm)
Weight: 901.5(g)
Housing material: Nylon, PC
Installation: 35mm Din Rail installation
Protection degree: IP20
Power cable: AC in: 2.5mm2 ~4mm2
Load cable: 1.5mm2 ~2.5mm2
Installation Position: Distribution box (DB)
CE, RoHS, UL Approved